The Ellen MacArthur Foundation, working with consultancy (RE)SET, has formed the PaperFlex Consortium to accelerate development of recyclable and biodegradable paper-based alternatives to flexible plastic packaging. Founding members are Colgate-Palmolive, Mars, Nestle, PepsiCo, Procter & Gamble and Unilever, who will jointly fund and run trials on coatings and other technologies. The consortium is open to further FMCG companies, suppliers, innovators and investors.
Why this mattersA joint R&D push by six of the largest consumer goods groups could speed up paper-based replacements for flexible plastic, a format converters have struggled to substitute at scale.
- The PaperFlex Consortium was formed by the Ellen MacArthur Foundation with consulting agency (RE)SET.
- Six founding members: Colgate-Palmolive, Mars, Nestle, PepsiCo, Procter & Gamble and Unilever.
- Members will plan, fund and carry out collaborative trials on biodegradable coatings and manufacturing-line performance for paper-based flexible packaging.
- The consortium aims to develop formats that are both recyclable and biodegradable if littered.
- Membership is open to other FMCG companies, suppliers, innovators and investors.
Magnera reported a fourth-quarter GAAP operating loss of USD 90m, including a USD 106m goodwill and other impairment charge, on net sales of USD 851m. Adjusted EBITDA for the quarter was USD 97m, up 8% year on year, and the company repaid USD 122m of debt over fiscal 2026. For fiscal 2027 it guides to adjusted EBITDA of USD 390m-410m.
Why this mattersA USD 106m impairment alongside 8% higher quarterly adjusted EBITDA and USD 122m of debt repaid shows Magnera's earnings base holding while acquired asset values are reset.
- Q4 GAAP operating loss of USD 90m includes a USD 106m goodwill and other impairment charge
- Q4 net sales USD 851m, adjusted EBITDA USD 97m, up 8% year on year
- Full-year net sales USD 3.3bn, GAAP operating loss USD 37m, adjusted EBITDA USD 378m, up nearly 4%
- Fiscal 2026 debt repayments totalled USD 122m, including USD 57m in the fourth quarter
- Full-year free cash flow USD 115m, a yield of over 25% at year-end
- Fiscal 2027 guidance: adjusted EBITDA USD 390m-410m, free cash flow USD 110m-130m
- Capital expenditure projected to rise to USD 85m in fiscal 2027, targeting consumer solutions and innovation.
- Footprint actions exiting lower-value business were taken in Argentina, the UK and France.
- Free cash flow of USD 110m-130m is earmarked entirely for debt reduction toward a 3x leverage target.
- Magnera completed its transition services agreement with Amcor on schedule, migrating 11 ERP systems across 10 manufacturing sites.
Chung Hwa Pulp chairman Huang Kun-hsiung said after a 12 November forum in Taipei that the Taiwanese pulp and paper maker will not buy wood from Australian forest areas assessed as ecologically high-risk, after Australian National University ecologist David Lindenmayer reviewed supplier coupe maps. The chips are shipped from Eden, New South Wales, to Hualien, and the upstream log supplier is state operator Forestry Corporation of NSW (FCNSW). Huang said Australian wood-chip imports have already fallen substantially, without giving a figure.
Why this mattersA paper producer tightening wood-chip sourcing on biodiversity risk signals growing scrutiny of forestry supply chains feeding Asian pulp and paper mills.
- Chairman Huang Kun-hsiung said after the 12 November 2026 forum that Chung Hwa Pulp will not buy from Australian sources found in medium- or high-risk ecological areas
- Huang said Australian wood-chip imports have already fallen substantially, without giving a figure
- FCNSW was fined USD 240,000 (AUD 360,000) in 2024 after a contractor felled 53 eucalypts in a protected area of Yambulla State Forest
- The NSW environment regulator brought 29 criminal charges over FCNSW logging in Tallaganda State Forest, halted in August 2023
- Chung Hwa Pulp said FCNSW held valid PEFC certification and that a chip shipment arriving on 13 March came from non-disputed areas
Smart Packaging Solutions has developed a Repun tray in lightweight solid board with a grammage of 550 g/m² for kiwis that Starpack, the packing arm of Belgian fruit and vegetable group Group A. De Witte, packs for Zespri. The tray is made from recycled material, is recyclable and is designed to meet the EU Packaging and Packaging Waste Regulation, whose first obligations have applied since 12 August 2026. It holds four, six or eight kiwis.
Why this mattersRetail packers now ask for packaging with PPWR documentation, which favours fibre converters able to supply compliance datasets to fresh-produce customers.
- The Repun tray is made of lightweight solid board with a grammage of 550 g/m²
- Starpack, Group A. De Witte's packing arm in Sint-Katelijne-Waver, Belgium, packs green and gold kiwis for Zespri
- The tray holds four, six or eight kiwis
- The tray is made from recycled material and is recyclable after use
- First PPWR obligations, including proof of packaging material composition, have applied since 12 August 2026
- Smart Packaging Solutions says it can supply PPWR datasets for all its packaging
Georgian Can Makers (GCM), a joint-stock company registered on 29 September 2026, plans a USD 84m aluminium beverage can plant in Georgia with annual capacity of up to 1.2 billion cans, COO Abdala Bino said. Construction is to start in 2027 and take 18-24 months, with commercial production targeted for 2029; the plan includes a used-can recycling line and sales to Armenia and Azerbaijan. Funding is to come from local and international capital, including share sales, with sources not yet specified.
Why this mattersIf financed, the plant would give Georgian beverage fillers, now largely reliant on imported cans, a local supplier and add capacity aimed at Armenia and Azerbaijan.
- Project cost estimated at USD 84m
- Planned annual capacity of up to 1.2 billion cans in 330ml and 500ml formats
- Construction to start in 2027 and last 18-24 months, with commercial production targeted for 2029
- Plant to include a line recycling used cans into feedstock
- Financing to come from local and international capital, including share sales; sources not yet specified
- GCM was registered on 29 September 2026; its principal shareholder is UK national Benjamin Wilson
The European Bank for Reconstruction and Development and Emirates NBD Egypt are providing a senior secured loan of up to USD 9.3m (EGP 500m) to National Company for Aluminium Tubes Manufacturing (TUBE). The loan funds new machinery to raise output, broaden the product range and support exports, and carries an incentive grant tied to ESG targets.
Why this mattersEBRD risk-sharing with a local bank opens long-term funding to Egyptian packaging SMEs, here adding aluminium tube capacity for pharma, cosmetics, food and export customers.
- Loan of up to USD 9.3m (EGP 500m) to National Company for Aluminium Tubes Manufacturing (TUBE)
- Lenders are EBRD and Emirates NBD Egypt
- This is EBRD's first investment in Egypt under a USD 25m risk-sharing facility signed with Emirates NBD Egypt in June 2025
- Loan funds purchase and installation of new machinery to increase output and diversify products
- An ESG-linked incentive grant is attached to the financing
- TUBE, founded in 1982, makes packaging for pharmaceutical, cosmetics, food and personal care industries
Can-One Berhad reported profit before tax up 77% year-on-year to RM28.820m for the third quarter ended 30 September 2026, as revenue eased 1.4% to RM817.967m, according to unaudited results announced on 19 November 2026. Profit attributable to owners more than doubled to RM15.984m, helped by a narrower foreign exchange loss and a stronger General Packaging division, while the group's US aluminium can plant is still not expected to turn positive for another three to five years.
Why this mattersHigher earnings on lower can volumes show Can-One's gains coming from mix and currency effects, while its US can plant remains three to five years from contributing.
- Q3 2026 profit before tax rose 77% year-on-year to RM28.820m from RM16.243m
- Q3 2026 revenue fell 1.4% to RM817.967m from RM829.334m
- Profit attributable to owners more than doubled to RM15.984m from RM6.313m in Q3 2026
- Nine-month 2026 profit attributable to owners was RM58.471m versus a loss of RM2.919m a year earlier
- General Packaging division lifted profit before tax by RM14.4m to RM32.5m despite revenue falling RM12.1m to RM775.290m on lower can volumes
- US aluminium can plant, operating since December 2023, is only expected to contribute positive results in three to five years
Greif has appointed Bill D'Onofrio as chief financial officer, effective 1 January 2027, succeeding Larry Hilsheimer after more than a decade in the role. D'Onofrio, currently chief transformation officer and head of investor relations and corporate development, has worked alongside Hilsheimer for 12 years. Hilsheimer will move into an advisory role focused on cost-optimisation process redesign.
Why this mattersFinance leadership continuity at a core industrial packaging group signals a managed handover rather than a strategic shift.
- Bill D'Onofrio becomes Greif CFO effective 1 January 2027
- He succeeds Larry Hilsheimer, CFO for over ten years
- D'Onofrio currently serves as chief transformation officer and VP investor relations and corporate development
- D'Onofrio has worked with Hilsheimer for 12 years
- Hilsheimer moves into an advisory role on cost optimisation process redesign
- Greif, founded in 1877, operates facilities in more than 35 countries
A pilot in Noord-Brabant, Netherlands, in which a professional cleaning operation switched from single-use bottles to Ecourage's refillable bottle and dispenser system, cut packaging waste by 84% and CO2 by 70% against single-use packaging and showed refilling can lower costs by more than 17%. The BRAVE'R project was led by consultancy Searious Business with Vebego Bright Solutions and Vebego Cleaning Services, and was funded by the Province of Noord-Brabant. The organisers present refill systems as a way to meet data requirements under the EU Packaging and Packaging Waste Regulation and the Digital Product Passport.
Why this mattersQuantified cost and waste data from a real commercial trial gives buyers a finance-based case for reuse, beyond sustainability arguments alone, as PPWR reuse targets approach.
- BRAVE'R pilot in Noord-Brabant, Netherlands reported 84% less packaging waste versus single-use.
- The trial found a 70% reduction in CO2 emissions compared with single-use packaging.
- Refilling lowered costs by more than 17% in the pilot.
- Project partners were Searious Business, Ecourage, Vebego Cleaning Services and Vebego Bright Solutions.
- Funding came from the Province of Noord-Brabant.
- Organisers linked the refill approach to EU PPWR and Digital Product Passport compliance needs.
Arabian Plastic Industrial Company (APICO) has completed acquisition of an existing factory site in the Third Industrial City of Jeddah for SAR 28m, funded from existing bank facilities. The deal, first flagged in September 2026, covers a 44,638.04 sqm site and follows approval from Saudi industrial zones authority MODON. APICO expects the financial impact to appear in its results from the second half of 2027.
Why this mattersBuying an existing factory adds production capacity for APICO in Saudi Arabia, though the company expects no financial contribution before the second half of 2027.
- APICO completed the acquisition for SAR 28 million.
- The site, in Jeddah's Third Industrial City, covers 44,638.04 square metres.
- MODON approved assignment of the lease contracts for the site.
- The purchase was fully funded through existing bank facilities.
- APICO first announced intent to buy the facility in September 2026.
- Financial impact is expected to begin appearing in results from H2 2027.
Atlantic Packaging's fibre-based Fishbone C-Clip carrier now holds Dr. Bronner's two-packs of Peppermint Pure-Castile Magic Soap sold at Costco warehouses across the United States, replacing about 14,600 pounds of plastic. The paperboard clip, made with Billerud board, replaces a plastic dogbone carrier and is designed for curbside recycling; Atlantic Packaging said no full life-cycle analysis of the two formats has been done.
Why this mattersA named retailer and brand owner switching a multi-pack carrier from plastic to fibre adds to pressure on converters to offer mono-material paper alternatives for shelf-ready packs.
- The Fishbone C-Clip replaces approximately 14,600 pounds of plastic in Dr. Bronner's two-pack carriers
- The carrier uses paperboard supplied by Billerud
- The packs are sold at Costco warehouses across the United States
- The carrier was tested at Atlantic Packaging's Solutions Center and in the field
- Atlantic Packaging said no full life-cycle analysis of the fibre and plastic formats has been carried out
Pac-Tech International, a Puerto Rico producer of bottled water and flavoured beverages owned by Diesco Industries, plans to invest USD 12.7m in an automated PET blow-moulding line at its Las Piedras plant so it can make more of its own bottles. The project is expected to create 20 jobs, taking the workforce to 258, and Puerto Rico's Department of Economic Development and Commerce has recommended USD 3.84m in incentives. Pac-Tech expects the line to raise bottle output, cut material waste and support exports to the Caribbean.
Why this mattersA beverage filler bringing PET bottle making in-house reduces the volume it buys from outside container suppliers in Puerto Rico.
- Pac-Tech plans to invest USD 12.7m in a new PET bottle production line at Las Piedras, Puerto Rico
- The project is expected to create 20 specialised jobs, taking the workforce to 258
- New jobs would add about USD 624,000 to annual payroll
- Puerto Rico's DDEC recommended USD 3.84m in incentives, including USD 3.81m for machinery and equipment
- The line uses automated blow moulding to produce PET bottles
- Pac-Tech aims to meet Puerto Rico demand and expand exports to the Caribbean
Borouge International has inaugurated a high melt strength polypropylene (HMS PP) facility in Burghausen, Germany, after an investment of more than EUR 100m (USD 110m) that triples production capability at the site. The plant, started up on 17 November 2026, supplies recyclable HMS PP foam used in reusable cups, food packaging, automotive and construction applications.
Why this mattersA tripling of HMS PP foam capacity strengthens European supply of recyclable, lightweight polyolefin material that converters need to meet PPWR reuse and recyclability requirements.
- Investment of more than EUR 100m (USD 110m) tripled HMS PP production capability at Burghausen, Germany
- Plant officially inaugurated on 17 November 2026, following start-up
- Product is Daploy HMS PP, developed at Borouge International's Innovation Center in Linz, Austria
- Material is used in reusable coffee cups, food packaging, automotive foam parts and building insulation
- Company cites support for meeting EU Packaging and Packaging Waste Regulation (PPWR) requirements
- Part of Borouge International's global target of 13.8 million tonnes annual polyolefins capacity by 2030
Spain's Sistema de Depósito, Devolución y Retorno (SDDR) for single-use beverage containers has failed to enter into force as scheduled under Royal Decree 1055/2022, the SDDR Association for Spain said on 18 November 2026. The association cited the lack of an authorised operator and unresolved coordination rules as the main blockers. A period of government formation could delay the remaining regulatory steps further.
Why this mattersWithout an authorised operator Spain's deposit scheme, billed as Europe's largest, cannot start, leaving beverage producers and retailers without a date as the EU's 2029 collection target nears.
- The SDDR for single-use beverage containers was due to take effect in November 2026 under Royal Decree 1055/2022.
- No entity has yet been authorised to operate the deposit scheme.
- It remains undecided whether Spain will have one operator or several.
- EU packaging rules require coordination measures between multiple operators, which are not yet defined.
- The SDDR Association for Spain groups Aecoc, Anged, Asedas and more than 50 pre-signed companies.
- The EU target is 90% separate collection of plastic bottles and beverage cans by 2029.
Unirima, the Italian association of paper and board recyclers, reported a national paper and board packaging recycling rate of 93.08% in 2025, the highest since 2009 and above the EU's 2030 target of 85%. Italy's rate exceeds the European average of 76.3%, with around 700 plants processing 6.65 million tonnes of waste paper in 2025 and exports up 13% in the first half of 2026.
Why this mattersItaly's recycling performance, well ahead of the EU 2030 target, strengthens the country's position as a fibre supplier even as export reliance and cost pressures expose the sector to trade and energy risk.
- Italian paper and board packaging recycling rate reached 93.08% in 2025, the highest since 2009
- The rate exceeds the EU's 2030 target of 85% and the European average of 76.3%
- About 700 plants processed 6.65 million tonnes of recovered paper in 2025
- H1 2026 exports of recovered paper rose 13% to nearly 950,000 tonnes, with 44.8% going to India
- Recovered corrugated board prices at the September 2026 Comieco auction were 15% lower year on year
- 51.8% of companies in the sector reported that rising operating costs weighed on turnover
A life cycle assessment published in Resources, Environment and Sustainability and announced on 19 November 2026 found that replacing single-use polyethylene packaging with paper, glass, aluminium or steel could raise greenhouse gas emissions by 190% in the US and 50% in Europe and increase packaging mass up to five- to six-fold. The study, guided by Michigan State University, Circular Analytics and Trayak, covers manufacture to disposal but excludes use-phase effects such as breakage and product loss, and builds on earlier regional studies whose authors included ExxonMobil researchers. The authors call for region-specific data and case-by-case evaluation of packaging choices.
Why this mattersThe study, building on work co-authored by ExxonMobil researchers, adds to evidence policymakers and brand owners weigh when deciding whether to replace plastic with fibre, glass or metal.
- Substituting PE packaging could raise emissions by 190% in the US and 50% in Europe, the study found
- Packaging mass could rise up to five to six times under substitution
- Results were announced on 19 November 2026; independent experts reviewed conformance with ISO 14040:2006 and ISO 14044:2006
- Lead author is Manfred Tacker of Circular Analytics; the research was guided by Michigan State University, Circular Analytics and Trayak
- The earlier European and US studies it builds on included ExxonMobil researchers
- Higher recycling of PE stretch film cut global warming potential in Europe but increased eutrophication
China's 15th Five-Year Plan outline (2026-2030) commits to accelerating bamboo-for-plastic substitution, the first time the programme has entered a national mid- to long-term plan, according to a policy review published on 19 November 2026. Since mid-2025 ministries have expanded the official product catalogue, backed bamboo products in green consumption and public procurement rules, added them to the foreign-investment encouragement list and issued a national standard for bamboo straws, while China's courier association has set volume goals for bamboo courier packaging. Guangdong has adopted a 2026-2030 bamboo industry plan, Fujian is drafting one and Zhejiang is promoting bamboo courier packaging.
Why this mattersCourier-industry goals rising to 1bn bamboo packs a year by 2030, with postal-regulator backing, create a policy-supported alternative to plastic in Chinese parcel packaging.
- The 15th Five-Year Plan outline (2026-2030) calls for accelerating bamboo-for-plastic development, the first time the programme has entered a national mid- to long-term plan
- The official bamboo-for-plastic product catalogue was expanded in July 2025 from 17 to 25 categories
- China's courier association set targets for bamboo-based courier packaging rising from 200m units in 2026 to 1bn units in 2030
- National standard GB/T47057-2026 for bamboo drinking straws took effect on 1 August 2026
- A carbon-footprint standard system covering 50 bamboo-for-plastic product sub-categories in six groups, described as the first of its kind, was published in May 2026
- Guangdong targets bamboo forest area above 8m mu and bamboo industry output of USD 7.5bn (CNY 50bn) by 2030
Kyrgyzstan will ban the production, sale and free distribution of polyethylene bags across the country from 1 January 2027, President Sadyr Zhaparov said. The measure extends a pilot restriction introduced in the Issyk-Kul region in 2023 to the whole country.
Why this mattersAnother national single-use plastic bag ban adds to the patchwork of country-level restrictions packaging suppliers and retailers must track and comply with.
- Ban on production, sale and free distribution of polyethylene bags takes effect nationwide in Kyrgyzstan on 1 January 2027
- President Sadyr Zhaparov announced the measure during a meeting with residents of the Ton and Jeti-Oguz districts
- A pilot ban on polyethylene bags was introduced in the Issyk-Kul region in 2023
- The government states the aim is to reduce plastic bag use and protect the environment