Metsä Tissue has abandoned plans for a tissue mill at Humber Freeport in Goole, East Yorkshire, after financial evaluations. The project on a 211-acre site, which would have been the UK's largest paper mill, was designed to produce around 240,000 tonnes of tissue a year, roughly a fifth of UK production. Site developer Wykeland Group, which secured detailed planning consent in early September, is in talks with alternative end users.
Why this mattersThe cancellation removes capacity that would have supplied roughly a fifth of UK tissue output, leaving import reliance unchanged and a fully consented site seeking a new occupant.
- The Goole mill was designed to produce around 240,000 tonnes of tissue a year, about a fifth of UK production
- Metsä Tissue chose Goole for the mill in September 2023
- The 211-acre site holds full planning consent for 3m sq ft of manufacturing and high-bay warehousing space, secured in early September
- Planning documents projected around 338 jobs over a 10-year construction period and a USD 287m (GBP 217m) local economic injection during construction
- The site was expected to yield USD 4.85m (GBP 3.67m) a year in business rates and USD 35.1m (GBP 26.5m) in annual gross value added
- Wykeland Group, holder of the long-term development rights, is talking to prospective alternative end users
Felix Schoeller has commissioned a 1.2 MW high-temperature heat pump at its Weissenborn paper mill in Germany, developed with Fraunhofer IEG under the EU-backed PUSH2HEAT project, to turn 30-70C waste heat into 120C process steam. In its first 300 operating hours the unit averaged 1.2 tonnes of steam per hour at 2.3 bar, and the mill could save up to 600 tonnes of CO2 a year if run 4,000-5,000 hours annually.
Why this mattersA working route to decarbonise steam supply from mill waste heat could cut gas dependence across energy-intensive paper production if replicated at scale.
- 1.2 MW high-temperature heat pump installed at Felix Schoeller's Weissenborn paper mill in Germany.
- The unit converts 30-70C waste heat from paper production into 120C steam at 2.3 bar.
- First 300 operating hours produced an average of 1.2 tonnes of steam per hour.
- Measured annual work number (seasonal performance factor) of 2.3.
- Potential CO2 savings of up to 600 tonnes a year at 4,000-5,000 operating hours.
- Demonstration began in September 2026, with a full year of real-operation testing to follow; the site is a nominee for the European Heat Pump Award 2026.
Hylte Paper has partially paused production at its Swedish paper mill because of high electricity prices this autumn. Technical director Roger Bergström said the mill's location in price area SE4 makes it about USD 19.9m (SEK 200m) more expensive to run than a site in a more favourable area.
Why this mattersRegional power price gaps in Sweden are forcing paper producers to curb output, threatening the competitiveness of mills outside low-cost price zones.
- Hylte Paper has partially paused production because of high electricity prices this autumn
- The mill is in Swedish electricity price area SE4, which the company says has a large effect on its power price
- Technical director Roger Bergström estimates the SE4 location adds about USD 19.9m (SEK 200m) to running costs compared with a more favourable site
- The company says Sweden has in effect the highest electricity prices in Europe
The Buenos Aires provincial labour ministry imposed compulsory conciliation on 12 November 2026, ordering Interpack S.A., operator of the Papelera del Sur board mill in Tornquist, to reinstate the 160 dismissed workers and suspend the closure for an initial 15-day negotiation period. The company blamed the closure, announced as definitive, on imported duplex and triplex board amid global oversupply, and has not said it will reconsider.
Why this mattersImport competition and global board oversupply are pushing an Argentine recycled-fibre duplex and triplex board producer towards closure, which would remove domestic carton board supply.
- Buenos Aires labour ministry ordered compulsory conciliation on 12 November 2026 at its Bahía Blanca regional office
- Interpack S.A. must restore conditions to 4 November, reinstate all 160 dismissed staff and suspend closure measures for 15 days, extendable by five
- About 110 of the jobs are covered by collective bargaining and about 50 are outside it
- The mill makes duplex and triplex paperboard for packaging from recovered paper and board
- The company cited loss of competitiveness against imported board and international oversupply, and said it would pay severance
- Company spokespeople said the plant ran only 15 days a month last year, with 30% pay cuts and a 20% staff reduction from about 200
- As of 17 November 2026 the Tornquist plant had not reopened despite the mandatory conciliation order.
- The company rejected proposed tax relief, subsidies and a rotating-suspension scheme that the union had accepted.
- The Buenos Aires labour ministry's conciliation period can be extended by a further five days if negotiators see scope for agreement.
- The Buenos Aires provincial labour ministry opened a formal infraction proceeding (sumario) after the company failed to comply with the conciliation order.
- A pallet of recycled carton board made in Tornquist costs about USD 1,000 versus USD 743 for an equivalent import from China, a gap of about 25 percent.
- The first hearing of the mandatory conciliation process, running 15 business days with at least three meetings, is scheduled for 20 November 2026.
- The company continues to pay wages and keeps its other plants running, in El Palomar and the Pilar Industrial Park.
Grupo Yaguarete is investing USD 20m in a new corrugated board plant in Alto Paraná, Paraguay, to expand capacity and serve customers in the east of the country and the wider region. A finishing line, consisting of a rotary printer and die-cutter, is the first equipment to start, from November 2026.
Why this mattersThe Alto Paraná plant puts corrugated capacity close to box buyers in eastern Paraguay, a commercial and logistics hub with regional connections.
- Investment in the Alto Paraná corrugator plant is USD 20m
- A finishing line with a rotary printer and die-cutter starts operating from November 2026
- The plant is intended to serve customers in eastern Paraguay and other regional markets
- Grupo Yaguarete is a family-owned company of German origin with about 50 years in Paraguay and roots in recycled fibre
- President and general manager Andreas Neufeld said the plant adds production capacity and technology
Bohui Paper reported nine-month 2026 revenue of USD 2.144bn (CNY 14.305bn), down 1% year on year, and net profit attributable to shareholders of USD 14.56m (CNY 97.16m), down 20.01%. Profit excluding non-recurring items rose 2.82% to USD 13.55m (CNY 90.42m); basic earnings per share were USD 0.0109 (CNY 0.0727).
Why this mattersWith profit before non-recurring items up 2.82% on near-flat revenue, the fall in reported earnings reflects lower one-off gains rather than weaker trading.
- Nine-month 2026 revenue USD 2.144bn (CNY 14.305bn), down 1% year on year
- Net profit attributable to shareholders USD 14.56m (CNY 97.16m), down 20.01% year on year
- Net profit excluding non-recurring items USD 13.55m (CNY 90.42m), up 2.82% year on year
- Basic earnings per share USD 0.0109 (CNY 0.0727)
Taiwanese paper groups YFY and Long Chen Paper reported improved nine-month 2026 results on 13 November 2026. YFY's net profit rose 52.7% to TWD 2.2bn (EPS TWD 1.33), although third-quarter profit fell 5.9%. Long Chen swung to a nine-month profit of TWD 430m from a TWD 710m loss (EPS TWD 0.34) and approved its 30th share buyback.
Why this mattersHigher nine-month earnings at YFY and Long Chen mark an improvement for Taiwan's paper sector on 2025, though YFY's third-quarter profit fell year on year.
- YFY nine-month 2026 net profit rose 52.7% year on year to TWD 2.2bn, EPS TWD 1.33
- YFY Q3 2026 net profit was TWD 1.42bn, down 5.9% year on year, EPS TWD 0.86
- Long Chen Paper nine-month 2026 net profit was TWD 430m, against a TWD 710m loss a year earlier, EPS TWD 0.34
- Long Chen Paper Q3 2026 net profit was TWD 190m, up from a loss in the prior-year quarter, EPS TWD 0.15
- Long Chen Paper's board approved its 30th treasury share buyback
- YFY's industrial paper and paper container segment posted a TWD 33m operating loss in Q1-Q3 2026, down from TWD 455m a year earlier, a 92.6% improvement
- The segment generated TWD 26.215bn of revenue in Q1-Q3 2026, 46% of group revenue of TWD 57.415bn, up 4.9% year on year
- YFY's group-wide Q1-Q3 2026 operating loss was TWD 357m, with the pulp and paper segment posting the largest loss at TWD 1.442bn
- A July 2026 bid by Nine Dragons Paper and Shanying International to raise Chinese industrial paper prices by CNY 50 per tonne failed to materialise
China's white-board paper weekly average price rose 0.40% week on week to USD 522/t (CNY 3,483/t) on 13 November 2026, while recovered-fibre costs fell faster. Nine Dragons Paper cut its purchase prices for waste yellow board paper by USD 9-15/t (CNY 60-100/t) across its mills.
Why this mattersFalling waste paper costs give containerboard and boxboard producers room to defend margins even as output prices stay range-bound on weak orders.
- White-board paper weekly average price rose 0.40% week on week to USD 522/t (CNY 3,483/t) on 13 November 2026, up 0.23% year on year
- Weekly output was 201,000 tonnes, up 4,000 tonnes week on week, with capacity utilisation at 72.3%
- Weekly sales volume was 193,000 tonnes, up 0.52% week on week
- Nine Dragons Paper cut purchase prices for waste yellow board paper by USD 9-15/t (CNY 60-100/t) across its production bases
- White card paper ex-factory prices near five-year lows are drawing some demand away from white-board paper
- The market expects mainstream quotes to move in a narrow range next period amid weak order follow-through
The Toulouse commercial court has ordered the liquidation of Fibre Excellence's pulp and paper mill in Saint-Gaudens, France, ending rescue talks and closing the group's last production site. About 300 jobs are affected across the plant and its Labège head office, after a EUR 200m (USD 221m) revival project backed by Portuguese papermaker Ghost, the Occitanie region and insulation group Soprema failed to close in time. Redundancy notices are expected between 20 and 25 December 2026.
Why this mattersWith Saint-Gaudens following Tarascon into liquidation, Fibre Excellence no longer produces pulp and paper in France after a EUR 200m rescue failed to close.
- Toulouse commercial court ordered liquidation of the Fibre Excellence Saint-Gaudens mill on or before 14 November 2026
- About 300 jobs affected across the Saint-Gaudens site and the Labège head office
- A EUR 200m (USD 221m) rescue project backed by Ghost, the Occitanie region and Soprema failed to close in time
- Fibre Excellence entered receivership in April 2026 with 670 employees across two sites
- Its Tarascon mill was liquidated in July 2026 for lack of a buyer
- Indonesian shareholder Jackson Wijaya had invested close to EUR 300m (USD 332m) in equipment renovation
Bracell, controlled by Royal Golden Eagle, has filed an environmental impact study with Mato Grosso do Sul's environmental agency for a USD 2.8bn (BRL 16bn) pulp mill in Bataguassu. The mill would draw water from the Paraná river, use about 12 million cubic metres of eucalyptus a year and produce up to 2.92m tonnes of kraft pulp annually, or about 2.6m tonnes of mixed kraft and dissolving pulp. The state government expects Bracell to announce its final choice between Bataguassu and Água Clara on 6 May.
Why this mattersAt up to 2.92m tonnes a year of eucalyptus kraft pulp, the Bataguassu mill would add large-scale supply to global markets, with a dissolving pulp option built in.
- Investment of USD 2.8bn (BRL 16bn); environmental impact study filed with Mato Grosso do Sul environmental agency Imasul
- Proposed site covers 1,318 hectares by the BR-267 highway in Bataguassu, 3.9km from the Paraná river
- Flexible design allows either 2.92m tonnes a year of kraft pulp, or a mixed output of about 2.6m tonnes a year of kraft and dissolving pulp
- Mill would use about 12 million cubic metres of eucalyptus wood a year
- Construction estimated at up to 38 months, with a peak workforce of 12,000 and about 2,000 permanent jobs after start-up
- State government expects Bracell to announce its site choice, contested with Água Clara, on 6 May
The US International Trade Commission determined on 6 November 2026 that imports of high-purity dissolving pulp from Brazil and Norway do not materially injure or threaten US producers, so no antidumping or countervailing duty orders will be issued. The Commerce Department had found dumping margins of 6.50% for Brazil and 6.51% for Norway and a 9.37% subsidy rate for Brazilian producers; Bracell's Bahia and São Paulo units were among those investigated.
Why this mattersBrazilian and Norwegian dissolving pulp keeps US market access without the investigated duties, removing a cost threat for exporters such as Bracell despite Commerce's dumping findings.
- USITC decision taken by five commissioners on 6 November 2026; a sixth did not participate
- The negative injury finding means Commerce will issue no antidumping or countervailing duty orders in these investigations
- Commerce had set final dumping margins of 6.50% for Brazil and 6.51% for Norway
- A countervailable subsidy rate of 9.37% had been calculated for Brazilian producers
- Commerce examined Bracell Bahia Specialty Cellulose and Bracell SP Celulose jointly
Vitro shareholders approved one or more tender offers for the glass maker's outstanding Series A shares, to be followed by cancellation of its listing on the Mexican Stock Exchange and its registration with the national securities registry. The vote passed with 96.6% of shares in favour on 13 November 2026; the offer prospectus and revised bylaws, conditional on completion of the offer and delisting, are still to be published.
Why this mattersTaking Vitro off the Mexican exchange would end its public equity listing and reduce the disclosure available to its glass customers, lenders and competitors.
- Shareholders approved the resolutions with 96.6% of outstanding shares in favour on 13 November 2026
- Vitro will launch one or more tender offers for its Series A, Class I and II ordinary shares
- After the offer, Vitro will apply to cancel its listing on the Bolsa Mexicana de Valores and its registration in Mexico's national securities registry
- The offer prospectus has yet to be published
- A full rewrite of the bylaws takes effect only once the offer and delisting are completed
Jinan-based borosilicate glass maker Lynoo Pharmaceutical Packaging names industrialisation of glass substrates for semiconductor packaging, including a 4.8 million-piece-a-year line at its Jinan plant, as the main use of proceeds from the Hong Kong listing it applied for on 28 September 2026. Upgrades to its pharmaceutical glass business come second, and no fundraising target has been disclosed. Pharmaceutical glass revenue fell to USD 54m (CNY 357m) in 2025 from USD 70m (CNY 467m) in 2024.
Why this mattersA borosilicate pharmaceutical glass supplier is steering new capital to semiconductor substrates as its drug packaging revenue shrinks under Chinese healthcare cost controls and volume-based procurement.
- Lynoo Pharmaceutical Packaging filed its Hong Kong listing application on 28 September 2026
- Planned glass substrate line at the Jinan plant has 4.8 million pieces a year of capacity, covering melting, forming, cutting, grinding and polishing
- A single large production furnace is estimated to cost USD 120m-150m (CNY 800m-1,000m)
- Pharmaceutical glass packaging revenue fell to USD 54m (CNY 357m) in 2025, 36.3% of total revenue, from USD 70m (CNY 467m) in 2024
- Household heat-resistant glass revenue rose to USD 91m (CNY 609m) in 2025, 62.1% of total revenue
- The company renamed itself from Linuo Special Glass to Lynoo Pharmaceutical Packaging in November 2024
Constantia Flexibles is launching a battery materials business under the brand energon, producing pouch-cell laminates for lithium-ion batteries at its Constantia Patz site in Loipersbach, Austria, using aluminium foil from its Constantia Teich plant in Weinburg. The move follows five years of development and marks the flexible packaging group's first push beyond packaging, targeting electric-vehicle batteries, energy storage and electronic devices.
Why this mattersA top-three flexible packaging producer diversifying into battery materials signals how packaging converters are using existing aluminium-foil expertise to enter adjacent, higher-growth markets.
- Constantia Flexibles launches a new brand, energon, for battery materials after five years of development
- Pouch-cell laminates for lithium-ion batteries are produced at the Constantia Patz site in Loipersbach, Austria
- Aluminium foils for the laminates are made at the Constantia Teich plant in Weinburg, Lower Austria
- Constantia Flexibles reported revenue of EUR 2.28bn (USD 2.52bn) in financial year 2025
- The group operates 37 sites in 18 countries with about 8,500 employees
- Constantia describes itself as the world's third-largest producer of flexible packaging
Stevanato Group has announced the divestment of its California plants as it reviews the role of its engineering division in the portfolio. The Italian maker of pharmaceutical containment and drug-delivery systems disclosed the move with third-quarter 2026 results, in which group revenue rose 8% to EUR 326.1m while engineering revenue fell 12%.
Why this mattersSelling the California plants would shrink Stevanato's exposure to an engineering division whose revenue fell 12% in a quarter when group revenue rose 8%.
- Stevanato has announced the divestment of its California plants amid a review of the engineering division's role
- Engineering revenue fell 12% in Q3 2026
- Biopharmaceutical and diagnostic solutions revenue rose 10% to EUR 294m, 11% organically
- Group Q3 2026 revenue rose 8% to EUR 326.1m; adjusted EBITDA rose 14% to EUR 88.8m, a 27.2% margin
- Q3 net profit rose 16% to EUR 41.8m
Italian private equity firm Nextalia has agreed a partnership with the Sunino family to build a new rigid food packaging group around Plastic Legno and sister company Resaplast. Nextalia will hold a majority stake via its Nextalia Capitale Rilancio fund, with the Sunino family remaining a minority shareholder and industrial partner, and plans to fund capacity expansion, innovation and further acquisitions in the fragmented rigid food packaging market.
Why this mattersNextalia gains a funded platform for acquisitions in Italy's fragmented rigid food packaging market, starting from dairy and confectionery container plants serving over 100 customers.
- Nextalia will hold majority ownership of a new group combining Plastic Legno and Resaplast.
- The Sunino family retains a minority stake and stays on as industrial partner, with Paolo Sunino continuing as Plastic Legno CEO.
- Funding comes through the Nextalia Capitale Rilancio fund, earmarked for capacity, innovation and acquisitions.
- Plastic Legno makes rigid plastic packaging for dairy and confectionery at Castellamonte in Piedmont; Resaplast operates a plant in Conversano, Apulia.
- The two companies together supply more than 100 customers including major Italian food producers.
- Sunino Group's non-food activities, including promotional items and sportswear, are being spun out and remain fully owned by the Sunino family.
Alexandria Petroleum Additives Company (ACBA), a unit of the Egyptian General Petroleum Corporation (EGPC), has approved construction of a plastic packaging plant at an extraordinary general assembly. The plant will supply packaging to petroleum-sector companies, particularly motor-oil producers and fillers, as part of EGPC's industrial integration plan. No investment figure, capacity or start-up date was disclosed.
Why this mattersA state oil group's move into captive plastics packaging could reduce Egyptian oil-sector reliance on imported containers and third-party converters.
- ACBA's extraordinary general assembly approved the plastic packaging plant project on 15 November 2026
- The assembly was chaired by EGPC chief executive Salah Abdel Karim
- The plant will supply packaging to petroleum-sector companies, especially motor-oil producers and fillers
- The project is run jointly with the Egyptian General Petroleum Corporation (EGPC)
- No investment amount, production capacity or completion date was given
Saudi plastics manufacturer Arabian Plastic Industrial Company (APICO) has obtained a SAR 20m working-capital facility from the Saudi Industrial Development Fund, secured on its fixed assets and a promissory note. The company said the funding will support its operations and growth.
Why this mattersThe facility gives APICO state development finance for working capital and expansion, pledged against its fixed assets.
- APICO signed a SAR 20m working-capital facility with the Saudi Industrial Development Fund (SIDF).
- The facility is secured by a lien on fixed assets and a promissory note.
- The company states the funding will support working capital requirements and business expansion.
- The agreement was announced 15 November 2026.
Vigo-based canning machinery maker Hermasa has reorganised as Hermasa Global Group and created an artificial-intelligence subsidiary, Blueatlantiq, which analyses production data to raise productivity and yield in canneries, starting with tuna lines. The unit is the result of eight years of work centred on Tecmopic, an R&D project with canning association Anfaco-Ctyma that mobilised EUR 2.5m of investment. It sits alongside Hermasa's Canning Technology machinery division, founded in 1972.
Why this mattersHermasa now offers canners real-time efficiency and yield monitoring alongside its tuna and sardine lines, adding data services to equipment supplied to more than 70 countries.
- Hermasa reorganises into Hermasa Global Group and launches AI subsidiary Blueatlantiq
- Blueatlantiq's TunaView system shows productivity and yield on tuna canning lines in real time
- Blueatlantiq grows out of eight years of work centred on Tecmopic, an R&D project with Anfaco-Ctyma involving 27 researchers
- Tecmopic mobilised EUR 2.5m of investment, of which EUR 1.3m was subsidised by regional agency Igape
- Hermasa's Canning Technology division, founded in 1972, supplies tuna and sardine canning machinery to over 70 countries
- The group keeps its industrial base in Valadares, Vigo
The Court of Justice of the European Union ruled on 5 November 2026 that national authorities may ban hazardous household products sold in packaging that resembles food, settling a dispute between Orkla Care and the Swedish Chemicals Agency over nine laundry detergents sold in elongated, juice-carton-style packs. The agency had already banned the products; the case returns to the Swedish court to apply the ruling. The judgment interprets Regulation (EC) No 1272/2008 and sets out how authorities should assess similarity to food packaging, including shape, colour, labelling and smell.
Why this mattersBrand owners across the EU must now re-test household chemical packaging against food and drink look-alikes, or risk sales bans on a lower evidential bar for regulators.
- CJEU ruling issued 5 November 2026 in case C-395/25.
- Swedish Chemicals Agency had banned sale of nine Orkla Care laundry detergents.
- Products were sold in colourful, elongated cartons with folded lid and screw cap resembling juice or dairy drink packs.
- Court held a safety feature such as a removable label does not by itself rule out resemblance to food.
- Authorities need only show a non-negligible risk of confusion, not evidence that anyone was actually misled.
- Case returns to the Swedish national court to apply the ruling to the Orkla Care cartons.
Thai Coca-Cola bottler Haad Thip, recycler Oxitech and rPET producer Royce Universal signed a memorandum of understanding in September 2026 to turn their bottle-to-bottle PET recycling pilot into regular, full-scale rPET sourcing, the companies said on 9 November 2026. Used PET bottles collected on islands in Phang Nga province are processed into food-grade rPET pellets and returned to Haad Thip's Phunphin plant to make new bottles.
Why this mattersHaad Thip is securing food-grade rPET through its own regional collection-to-pellet chain, a model other Coca-Cola system bottlers could apply to meet recycled-content goals.
- Haad Thip, Oxitech and Royce Universal signed an MOU in September 2026 to move from pilot to regular rPET sourcing
- Community collection on Koh Yao Noi and Koh Yao Yai removed about 60 tonnes of PET bottles in the prior year, against about 22 tonnes of Haad Thip PET bottles entering the islands
- Total used packaging collected on the two islands was about 100 tonnes, against about 37 tonnes of Haad Thip packaging entering
- The chain runs from collection on Koh Yao Noi, to sorting and baling by Oxitech in Krabi, to rPET pellet production by Royce Universal in Nakhon Pathom, to bottle making at Haad Thip's Phunphin plant in Surat Thani
- Haad Thip is the Coca-Cola system bottler and distributor for 14 provinces in southern Thailand
The Washington Department of Ecology has fined 38 companies a combined USD 246,548 for failing to meet the state's 2021 recycled-plastic content law on single-use beverage containers, trash bags and household and personal-care containers. Arizona Beverages USA, Harvest Hill Beverage Company, HP Hood and Ocean Spray Cranberries each achieved 0% of the required recycled content, while Kroger reached 0.97%. Companies have fewer than 30 days to pay or appeal.
Why this mattersThe enforcement shows a US state recycled-content mandate now generating real financial penalties, a model other states and the EU may watch for recycled-content rule design.
- 38 companies fined a combined USD 246,548 for non-compliance with Washington's recycled-content law in 2025.
- Individual fines ranged from USD 131 to USD 43,381, based on in-state sales and recycled-plastic use.
- Arizona Beverages USA, Harvest Hill Beverage Company, HP Hood and Ocean Spray Cranberries each achieved 0% of the required recycled content.
- Kroger achieved 0.97% of the recycled-content standard.
- More than 220 million pounds of covered plastic containers and bags were sold in Washington in 2025, with about 70% meeting the requirement.
- In the prior enforcement round, 23 companies were fined a combined USD 277,000.
Polysmart Packaging has commissioned a food-grade recycled PET plant with 60,000 tonnes annual capacity in Ileke, Ogun State, Nigeria, financed by NGN 40 billion in machinery and working-capital funding from First City Monument Bank. The company describes it as Africa's largest plastic recycling plant, converting post-consumer plastic waste into food-grade rPET for manufacturers.
Why this mattersAt about a tenth of Nigeria's estimated 600,000 tonnes a year of virgin PET use, the plant gives local packaging manufacturers a domestic food-grade alternative to imported resin.
- Plant capacity is 60,000 tonnes a year of food-grade recycled PET
- First City Monument Bank provided NGN 40bn of machinery and working-capital financing
- At full capacity the plant will process up to 100,000 tonnes of mixed plastics a year, about 6.5 billion bottles, according to Polysmart
- Nigeria uses an estimated 600,000 tonnes of virgin PET a year, mostly imported, according to Polysmart
- The facility in Ileke, Ogun State, was commissioned on 29 October 2026
- Polysmart describes it as Africa's largest plastic recycling plant
Sahara International Petrochemical Company (Sipchem) has completed the expansion of the propylene and polypropylene plants at its Al Waha subsidiary, raising their production capacity by more than 30%. It expects the financial impact from the fourth quarter of 2026, with no change to previously stated costs. The EPC contract, worth about USD 169m, was signed with SGC Arabia in August 2024.
Why this mattersThe Al Waha expansion adds Saudi propylene and polypropylene supply for converters of food packaging film and other products from the fourth quarter of 2026.
- Expansion raises capacity at Al Waha's propylene and polypropylene plants by more than 30%
- Financial impact expected from Q4 2026, with no change to previously stated costs
- EPC contract signed in August 2024 with SGC Arabia Company Limited, worth about USD 169m
- Completion announced on the Saudi Exchange on 15 November 2026
- Al Waha is a Sipchem subsidiary
- Polypropylene capacity rises from 450,000 to 600,000 tonnes per annum at Al Waha Petrochemical in Jubail.
- Propylene capacity increases by 72,000 tonnes per annum to 537,000 tonnes total.
- In July 2024 Sipchem separately awarded SGC E&C and SGC Arabia USD 187m (SAR 701.3m) to expand affiliate International Polymers Company's EVA plant by 70,000 tonnes per annum.
Novelis, the US-based rolled aluminium producer owned by Hindalco Industries, has agreed to sell its two wholly owned Chinese subsidiaries, Novelis (China) Aluminum Products and Novelis (Shanghai) Aluminum Trading, to Shenzhen Hongzhi Industrial Investment Co or its affiliates for USD 265m. The deal, signed on 14 November 2026, includes a potential earn-out of up to USD 10m and is expected to close within 12 months subject to regulatory approval. The two units generated USD 376m in net sales in the year to March 2026, about 1% of Hindalco's consolidated net sales.
Why this mattersNovelis hands units with USD 376m of annual sales to a Chinese buyer, narrowing the can-sheet and automotive aluminium supplier's footprint in China.
- Deal value USD 265m plus up to USD 10m earn-out
- Agreement signed 14 November 2026
- Buyer is China's Shenzhen Hongzhi Industrial Investment Co or its affiliates
- Units sold: Novelis (China) Aluminum Products and Novelis (Shanghai) Aluminum Trading
- The two subsidiaries reported USD 376m net sales in fiscal year ended March 2026
- Transaction expected to close within 12 months pending regulatory approvals
Shandong Guosu New Energy Technology's planned USD 150m (CNY 1bn) project in Linshu county, Linyi, Shandong, to recycle 240,000 tonnes a year of waste plastic has entered the project-approval stage. Construction is expected to start in the first quarter of 2027 and finish in the fourth quarter of 2028. It is described as one of the largest publicly disclosed chemical-recycling projects planned in Shandong.
Why this mattersAt 240,000 tonnes a year of waste-plastic input, the Linshu project would add sizeable Chinese chemical-recycling capacity, though its output is described as recycled energy rather than packaging-grade feedstock.
- Total investment USD 150m (CNY 1bn)
- Planned capacity is 240,000 tonnes of waste plastic a year
- Project is at the project-approval stage as of mid-November 2026
- Construction expected to start in Q1 2027, completion targeted for Q4 2028
- Located in Linshu county, Linyi, Shandong province
Dutch chemical recycler BlueAlp plans to raise its pyrolysis-oil production capacity from 24,500 tonnes a year to about 140,000 tonnes, doubling its Ostend, Belgium plant and building new facilities in Kampen and Rotterdam. The Kampen plant, with 50,000 tonnes a year of capacity, is backed by a EUR 21m EU Innovation Fund grant and is scheduled for 2029; a 40,000 tonnes a year Rotterdam plant is being developed with LBC Terminals.
Why this mattersAbout 140,000 tonnes a year of pyrolysis oil would enlarge European supply of chemically recycled feedstock for plastics producers seeking recycled content.
- BlueAlp's current Ostend, Belgium plant produces 24,500 tonnes of pyrolysis oil a year and will be doubled.
- A new Kampen plant will add 50,000 tonnes a year of capacity, planned for 2029.
- A planned Rotterdam plant with LBC Terminals will add 40,000 tonnes a year of capacity.
- Total own production capacity is set to rise to about 140,000 tonnes a year of pyrolysis oil.
- The Kampen plant is supported by a EUR 21m grant from the EU Innovation Fund.
- BlueAlp has licensing partnerships with Italian waste processor RES and Dutch biochemicals company BioBTX.
Reconomy has opened a USD 26m (GBP 20m) plastic recycling facility in Corby, England, under its Eurokey brand, one of the largest dedicated plastic recycling plants in the UK. The 138,000 sq ft site turns supermarket and retail transit packaging, sorted at Eurokey's Kettering plant, into pellets for UK packaging manufacturers, with capacity for 38,000 tonnes a year and more than 30 jobs.
Why this matters38,000 tonnes a year of new pellet capacity gives UK supermarket packaging suppliers a domestic closed-loop source of recycled plastic.
- Investment of USD 26m (GBP 20m) in the 138,000 sq ft Corby facility
- Annual processing capacity of 38,000 tonnes of plastic packaging
- More than 30 jobs created at the site
- Operates under the Eurokey brand, with sorting at a nearby Kettering facility
- Recycled pellets are supplied to UK packaging manufacturers serving supermarket supply chains
- Facility officially opened as reported on 13 November 2026
Angola has brought into force Presidential Decree 170/25, banning the production, import, sale and use of plastic bags thinner than 50 microns, straws, stirrers and plastic-stemmed cotton buds after a 12-month adaptation period. Corporate fines range from about USD 1,100 to USD 33,000 (AOA 1m to 30m), doubling for repeat offences, and non-compliant imports can be forfeited. A second phase covering polystyrene cups, plates, cutlery and small PET bottles is set for 22 September 2028.
Why this mattersImporters and converters supplying Angola must requalify packaging formats for thin bags, straws and stems, with a wider PET and polystyrene phase-out already scheduled.
- Presidential Decree 170/25 bans production, import, sale and use of shopping bags under 50 microns, straws, stirrers and plastic-stemmed cotton buds in Angola
- Corporate fines range from about USD 1,100 to USD 33,000 (AOA 1m to 30m), doubling for repeat offences
- ANIESA enforces the ban for medium and large enterprises; municipal administrations cover smaller shops and stalls
- Health, oil and gas, fishing, cosmetics, agriculture, construction and personal hygiene sectors are temporarily exempt pending sector-specific guidelines
- Certified biodegradable and compostable packaging is excluded from the current restrictions
- A second phase covering polystyrene cups, plates, cutlery and small PET bottles is scheduled for 22 September 2028
CFTC Chairman Michael Selig told the Beer Institute's annual meeting on 13 November 2026 that he has directed the agency's global markets team to examine aluminium pricing mechanisms, including the LME benchmark and the Midwest premium, and to develop reform options. He said the CFTC would consider whether additional US-based aluminium contracts could improve price discovery and hedging, citing an all-in US price of about USD 2.50 a pound, 75% above the LME benchmark.
Why this mattersReform of the Midwest premium and US benchmark pricing would change how aluminium is priced for US can makers and the brewers they supply.
- CFTC Chairman Michael Selig spoke at the Beer Institute Annual Membership Meeting in Washington DC on 13 November 2026
- S&P Global assesses the Midwest premium at about USD 1.10 a pound on top of an LME benchmark of USD 1.40, an all-in US price near USD 2.50, about 75% above the benchmark
- Selig has directed CFTC staff to develop concrete reform options and called the issue one of his top priorities
- The CFTC will consider whether additional US-based aluminium contracts could improve local price discovery and hedging
- Selig noted the CFTC does not set aluminium prices but oversees a derivatives market of nearly USD 600 trillion notional
Ghana's Environmental Protection Authority will enforce a nationwide ban on the production, import, distribution, sale and use of expanded polystyrene foam food containers and related products from 1 January 2027. The deadline was reaffirmed in the 2027 Budget presented to Parliament on 12 November 2026, forcing food vendors, manufacturers and retailers to switch to paper-based, reusable or biodegradable alternatives.
Why this mattersA nationwide EPS foam ban from January 2027 shifts Ghana's takeaway packaging demand towards paper and plant-based alternatives, while about six local foam producers must change products.
- Ban covers expanded polystyrene foam food containers, cups and plates, insulation, bedding and cushioning products
- Enforcement date of 1 January 2027 was reaffirmed in Ghana's 2027 Budget presented on 12 November 2026
- EPA issued the nationwide directive in May 2026, following a June 2025 directive from President John Dramani Mahama
- Exemptions apply to specialised polystyrene for medical, scientific, laboratory and diagnostic use
- Importers have been told not to place new orders; about six local manufacturers produce the affected materials
- EPA is promoting alternatives such as paper containers, plant-based packaging and traditional food-wrapping leaves
The Flexible Packaging Association (FPA) has written to congressional leaders urging floor votes on three bipartisan bills: the PACK Act (H.R. 6832) on recyclability labelling, the Recycled Materials Attribution Act (H.R. 7502) on recycled-content claims, and the STEWARD Act (S. 351) on recycling infrastructure grants. The letter, sent ahead of America Recycles Day, asks leadership to schedule consideration of all three measures.
Why this mattersNational labelling and recycled-content standards would replace a patchwork of state rules, such as California's SB 343, reducing compliance costs for flexible packaging makers.
- FPA sent a letter to House and Senate leaders Mike Johnson, Hakeem Jeffries, John Thune and Chuck Schumer.
- PACK Act (H.R. 6832) would set FTC-overseen national standards for recyclability, compostability and reusability claims.
- Recycled Materials Attribution Act (H.R. 7502) would direct the FTC to update its Green Guides and recognise advanced recycling and mass-balance accounting.
- STEWARD Act (S. 351) would authorise an EPA pilot grant programme to expand recycling access in underserved and rural areas.
- FPA president and CEO Dan Felton said the bills address labelling, recycled-content verification and infrastructure investment.
Chile has enacted Ley 21.847, published 9 November 2026, which extends from six months to two years the time the implementing regulation of its single-use plastics and bottles law, Ley 21.368, needs to take effect. The change pushes the 30% minimum returnable-bottle display requirement for supermarkets, and the recycled-content certificate, lot number and QR code system for disposable bottles, to 7 January 2028, about 18 months later than the Ministry of the Environment's earlier reading of 7 July 2026. Food-outlet bans on single-use items for eating in remain in force, with wood, paper and board items no longer needing biodegradable certification.
Why this mattersBottlers and supermarket chains in Chile gain roughly 18 extra months before having to build the returnable-bottle infrastructure and recycled-content certification system.
- Ley 21.847 was promulgated 23 October 2026 and published in Diario Oficial edition 44.594 on 9 November 2026.
- It changes the regulation's entry-into-force period from six months to two years after publication of Decreto 30.
- Decreto 30 was published 7 January 2026, so the regulation now takes effect 7 January 2028 by SPI's count.
- The 30% minimum returnable-bottle display share for supermarkets, set in Decreto 30 Article 17, is deferred to that date.
- Food-outlet rules in force since 13 February 2026 remain, but wood, paper and board items for eating in no longer need biodegradable certification.
- A new transitional article allows test reports and certificates from certification bodies as interim evidence of compliance with Articles 4 and 7.
Japan's Ministry of Economy, Trade and Industry discussed setting a mandatory numerical target for recycled plastic content in PET bottles at a 6 November meeting of its resource circulation subcommittee. The ministry's secretariat proposed starting with PET bottles, where recycling is already advanced, as a pilot case to create stable demand for recycled material. Committee members broadly supported the direction but raised concerns over securing domestic recycled feedstock, quality and cost.
Why this mattersA mandate would tighten competition for recycled PET in Japan and push bottle makers and brand owners toward higher recycled-content specifications ahead of binding rules.
- Discussion took place at the 14th meeting of METI's Resource Circulation Economy Subcommittee on 6 November 2026.
- METI's secretariat proposed beginning mandatory recycled-content requirements with PET bottles as a pilot sector.
- The rationale given is to create stable demand for recycled material.
- Committee members broadly supported the direction of the proposal.
- Concerns raised include securing domestic recycled feedstock supply, quality and cost.
Puerto Rico's House of Representatives approved Senate Project 1551 on 12 November 2026, pushing back the single-use plastics ban to 31 December 2031 and related penalties to 1 January 2032. The Senate had passed the bill a day earlier; it now goes to Governor Jenniffer Gonzalez for signature. The law introduces a phased transition with planning, voluntary adoption and a penalty-free warning period before enforcement begins.
Why this mattersDeferring the ban and penalties to 2032 keeps single-use plastic items legal in Puerto Rico for five more years, delaying demand for compostable and reusable alternatives.
- House approved Senate Project 1551 on 12 November 2026 by 28 votes to 24
- Senate approved the bill on 11 November 2026 by 24 votes to 4
- Ban on single-use plastics postponed to 31 December 2031 and penalties to 1 January 2032
- Transition has three phases: planning to 30 June 2028, voluntary adoption to 30 June 2031, and warnings without fines in the second half of 2031
- DACO fines under Law 51-2022 of USD 500, USD 1,000 and USD 5,000 for first, second and subsequent offences are deferred to 2032
- The previous deadlines were 31 December 2026 for the ban and 1 January 2027 for penalties